- - LCD display screen with backlight: Equipped with a large-sized LCD display screen with backlight, it can clearly display the target depth, metal type, operating mode, sensitivity level, and battery level at night. Even at night, you can use the detector to search for treasures normally;
- - Waterproof detection plate: An 8.5 inch large-sized detection plate with higher sensitivity and detection depth, which can expand the detection range of the instrument and improve detection efficiency. The waterproof detection plate allows you to use it underwater, making it very suitable for outdoor use, such as beaches, streams, and backyard; (Note: The control box is not waterproof)
£85.99
- - [High sensitivity metal detector] The metal detector allows you to quickly scan a large area, and then use the precise positioning tip to narrow down and precisely locate the target before excavation. The bar probe design allows you to insert a hand-held metal detector into the hole for detection;
- - 【 Easy to operate 】 Single button operation, when a metal object is detected, the LED light will light up. At the same time, there will be sounds and vibrations as alarms. When the detector approaches a metal target, the intensity of the alarm will increase, and this unique function can help users determine the exact location of the target;
£17.99
21%
OFF
- - 360 ° probe and three optional modes: needle metal detector 360 ° probe design, expanding the detection area and reducing target loss. Three modes - vibration mode (mute), audio mode, vibration and audio mode conversion, suitable for quiet, noisy, underwater and other different environments;
- - Fully waterproof design - The fully waterproof design allows you to detect in the water, making it suitable for diving. Light metal detector can be used to find treasures in narrow areas that cannot be reached by typical metal detector, such as looking for screws and nails in the wall, looking for screws in the garden to prevent accidents, and looking for lost valuables;
£37.99 £29.99
45%
OFF
- - Special helmet holder: It consists of 4 joints, which are connected by screws. The screws are adjustable so you can rotate the joints, each of which can be rotated 180 degrees. If there is, we'll give you a s adapter to match your camera's threaded hole on the bottom.
- - Rubber pads and sticky pads: Rubber pads are divided into curved and flat types, you can use them according to the situation. Industrial-strength waterproof rubber pads to help you mount the camera on your helmet. Note: After the first installation, please allow the stand to stand for 24 hours before use.
£19.99 £10.99