Camera Screen Protector 6pcs Compatible with DJI Osmo Pocket 3, 0.3mm 9H Hardness Tempered Glass*3 + Lens Protector*3 + Vacuum Cleaning Coth*1

Crystal clear fits superb. No issues. Though I would wish they came with wipes or some sort of cloth to clean your screen before application. Mine only came with a 3 pack of the protectors.

One down side, the lens protector, once you put that on ALL Your ND filter magnets will be very loose. It wont stick on as well and the stock OP3 has a small recess which this glass protector will fill. The small recess is so the nd filters can fit on and not slide around. Once you put this on it will slide around. IF You forget to take your nd filter off and close your camera it will simply fly off the camera and land on the floor. IF you do not want this to happen simply just chose not to put the camera protector glass on, but this also defeats the purpose of half the kit.

No instructions are included, and scanning the QR code on the rear of the box takes you to the website in general, not any instructional video. However, most Pocket Osmo users will likely be tech-friendly, so should be okay.
The microfiber cloth is in a dust-free packet that needs opening. Then open a packet of protectors - each pack contains a protector for the lens and the touchscreen, as well as a dust removal sticker (dab, dab, dab) and some guide stickers. I didn't use the guide stickers, though am familiar with them from similar mobile phone processes. There are three of these sets, so over time if they need replacing, this is a good value set.
I've provided photos to show that they will be bubble-free from edge to edge. There is no loss of clarity or warping of images. Touch control is unaffected. The Osmo still fits in its safety case.
A great way to extend the life of your Osmo.

I recently purchased an Osmo Pocket 3 camera. It's a very nice camera but somewhat fragile. I ordered these screen and camera lens protector glass guards from Amazon, and they arrived very quickly in good packaging. I've ordered K&F Concept products before, and this kit didn't disappoint. It's very well made and comes in three envelopes within a box, along with a cleaning cloth. Each envelope contains lens and screen guards. All in all, I am very happy with these protective glass guards and highly recommend them to any Osmo Pocket 3 owner.

Easy enough to apply though through user error OI did manage to get a slight bubble in the bottom right corner of the screen.
I can live with it, if I couldn't at least I could have 2 more attempts!

I've seen a few stomach-churning pictures of Pocket 3's with scratched and cracked screens and it's a traumatic experience. At a current price of under six pounds for three sets of screen and lens protectors it seems silly not to pop one on and hope that when the unthinkable happens they can make the difference between disaster and your beloved camera living to film another day. I have several K&F Concept items which I use with my Sony RX10 III so I wasn't too worried about quality. Inside there ais a large(ish) orange packet with a mediocre microfiber cloth crammed in. There are also three brown card envelopes inside each of which is a 9H tempered glass protector for the screen and one for lens along with a small sheet of stickers for alignment and dust removal. Task one is trying to get the stickers off the sheet without bringing the backing with it. It seems the machine that made these was to cut a smidge too deep making getting the stickers off a right pain. Once you've cleaned your screen and lens and removed the dust you need to fit the protectors. There's no protective sheet on top so it's just a case of removing the back proctor using the pull tab. Next you line them up and press and if all has gone well, watch the dark shadow creep to every corner as the silicone adhesive does its thing. I made that sound easy but there's every likelihood you'll need to lift the glass at least once to get a perfect alignment because these things fit right to the very edges. The lens protector in particular is an almost precision fit but the lens has a very slight recess which helps enormously. I didn't see or feel the lens protector bedding down which was a bit concerning but it's still on so fingers crossed. I did seem to get a single speck of dust under the screen protector which left a bit of a bullseye as you can see from my photos. I think I can live with it so for now I'm not going to try again. The lens glass went on first time which was a relief considering how small and fiddly it is, and how large and awkward my fingers are.
The lend protector does have a small mark on it which is fortunately near the edge so again I'll live with it. At first, I thought it was a protective top layer but it isn't.
I'm not blown away by the quality. The stickers are useless, the cleaning cloth is poor and there was a mark on the lens glass but at the price, and considering the money they may potentially save me, I'll forgive a little. Certainly worth the money on balance.

Se ajusta bien y no afecta en nada en lo táctil

Excelente servicio

As usual, great item from K&F concept. Fantastic price and quality. Love their stuff.

Well made and fits perfectly. Excellent third party alternative aty a great price.

Guys. If you bought Dji Osmo Pocket 3 and you know those small lenses for it? If you apply that screen protector to the camera lens - the magnetic attachments won't get into due to the thickness of prrotecting glass. Not very overthought. Other than that good stuff for the price I think.