This kit was a fantastic addition to my action camera travel kit!
It comes with multiple 1/4" screw interfaces (see pic). Whether I’m using it with my Osmo Pocket 3, Insta360 X5, or my Samsung S25 Ultra. This kit has me covered. The adjustable arm uses a double ball head design, allowing full 360° rotational adjustment.
I’ve used the 3” suction cup on my vehicle windshield and side glass, hood, wooden tabletops, and various flat surfaces while traveling. The pump action of this mount is great, making mounting extremely easy and fast. Releasing the cup when you’re ready to move is as simple as pinching the two tabs on top of the cup. It’s important to note the “warning line” on the pump. You simply press the pump until the warning line disappears into the housing, and you're good to go. The line makes monitoring the cup easy while in use. If you start to see the line over an extended period of use, simply depress the pump a couple times until the line disappears
This set takes up little space and has a permanent place in my travel kit. I highly recommend it!
It comes with multiple 1/4" screw interfaces (see pic). Whether I’m using it with my Osmo Pocket 3, Insta360 X5, or my Samsung S25 Ultra. This kit has me covered. The adjustable arm uses a double ball head design, allowing full 360° rotational adjustment.
I’ve used the 3” suction cup on my vehicle windshield and side glass, hood, wooden tabletops, and various flat surfaces while traveling. The pump action of this mount is great, making mounting extremely easy and fast. Releasing the cup when you’re ready to move is as simple as pinching the two tabs on top of the cup. It’s important to note the “warning line” on the pump. You simply press the pump until the warning line disappears into the housing, and you're good to go. The line makes monitoring the cup easy while in use. If you start to see the line over an extended period of use, simply depress the pump a couple times until the line disappears
This set takes up little space and has a permanent place in my travel kit. I highly recommend it!
13/09/2025
Continuously impressed with everything I pick up from k&f and this suction mount is no exception. Crazy strong suction and easy to use, and once this guy is on it is sucked on tight. High quality, hefty, durable materials - feels and is solid. The ball joints move smoothly and freely, and the knobs tighten and hold securely. Standard threads. Fantastic quality for the price.
08/09/2025
I got this mostly to use with my Osmo Pocket but also with my phone and action camera. All of these mount easily in my testing although the action cam needs a standard action cam mount which is also included but just not in my photos. The other thing I wanted here was size. My existing suction mount is a bit bigger and so more of a hassle. This suction mount is capable of all of these things so very versatile and allows me to take more stable video thus improving quality, and from lots of different angles I couldn't previously use as a tripod takes up too much space in my small flat
In terms of functionality it does what you expect ... it sticks to things. Flat surfaces like windows are my main use case so that it can easily create a seal. This mount uses a pump to suck air away and provide a stronger suction than my old clip down version which I never trusted. The main head is made of metal and the rubber suction pad is a thick rubber. Its a solid build. It has several mounting threads foenyou to attach the included magic-arm in different places. To use it, you place it on a durface and repeatedly push the button to suck out air. I'd say, functionally does everything you need.
In terms of value, I think its a really well built, strong, stable suction mount and I appreciate the compact size that just makes it more usable, more transportable and more storable. It's also not the most expensive and for me that combination of functionality, build quality and price makes this great value for money
In terms of functionality it does what you expect ... it sticks to things. Flat surfaces like windows are my main use case so that it can easily create a seal. This mount uses a pump to suck air away and provide a stronger suction than my old clip down version which I never trusted. The main head is made of metal and the rubber suction pad is a thick rubber. Its a solid build. It has several mounting threads foenyou to attach the included magic-arm in different places. To use it, you place it on a durface and repeatedly push the button to suck out air. I'd say, functionally does everything you need.
In terms of value, I think its a really well built, strong, stable suction mount and I appreciate the compact size that just makes it more usable, more transportable and more storable. It's also not the most expensive and for me that combination of functionality, build quality and price makes this great value for money
05/09/2025
I use it to hold my Osmo pocket camera and it’s perfect. It’s very easy very quick. It’s full metal feels very premium holds up well and you can literally stick it to any mirror with one hand. It’s very easy.
01/09/2025
The K&F Concept 3" Suction Cup Mount is a super way to mount an action camera or other small equipment to a smooth surface, allowing for a lot of creativity.
I've used a few K&F Concept accessories and always been impressed with the quality and value for money they offer. This mount lives up to those expectations. The mount base and magic arm are both sturdily built out of quality feeling metals. Everything has a good finish. The single knob adjustment for the magic arm allows free positioning of the camera without too much fuss. The pumping action for the suction cup is also straightforward. I didn't understand the indicator line until I used the pump once, and it immediately made sense. The pump button will stay sucked in when there is enough suction, and as long as the indicator line stays inside the base there is enough suction to safely hold the camera.
The suction cup is powerful enough to maintain suction not just on expected surfaces like car body panels and glass, but on some surfaces with light texture like the side of my refrigerator, or a wooden kitchen cabinet. I was surprised to see the suction cup hold for 30 minutes on my cabinet door without issue.
The 3" size gives a lot of flexibility for smaller cameras like action cameras, and doesn't require a lot of space to attach. It's natural for filming on cars, motorcycles, and other vehicles, but with imagination it can also allow for sticking up a camera in unusual places like windows, desks, or kitchen appliances. I'm happy to have it as another option for placing cameras wherever inspiration strikes.
I've used a few K&F Concept accessories and always been impressed with the quality and value for money they offer. This mount lives up to those expectations. The mount base and magic arm are both sturdily built out of quality feeling metals. Everything has a good finish. The single knob adjustment for the magic arm allows free positioning of the camera without too much fuss. The pumping action for the suction cup is also straightforward. I didn't understand the indicator line until I used the pump once, and it immediately made sense. The pump button will stay sucked in when there is enough suction, and as long as the indicator line stays inside the base there is enough suction to safely hold the camera.
The suction cup is powerful enough to maintain suction not just on expected surfaces like car body panels and glass, but on some surfaces with light texture like the side of my refrigerator, or a wooden kitchen cabinet. I was surprised to see the suction cup hold for 30 minutes on my cabinet door without issue.
The 3" size gives a lot of flexibility for smaller cameras like action cameras, and doesn't require a lot of space to attach. It's natural for filming on cars, motorcycles, and other vehicles, but with imagination it can also allow for sticking up a camera in unusual places like windows, desks, or kitchen appliances. I'm happy to have it as another option for placing cameras wherever inspiration strikes.
01/09/2025
This suction mount holds my DJI action 5 and DJI pocket 3. The quality is superb and functions like it should. It is versatile and can be mounted on any smooth surface. It is easy to adjust to get the perfect angle and is an excellent value for the money.
29/08/2025
This thing sticks. But not to everything.
But for what it sticks to, it’s stuck well.
I was not very trusting it can support my phone on it but now I think it works great if you can get it to stick.
The squeeze function makes it pretty simple. Your job is only to press down hard enough to get all the suction cup touching the surface and then the pump does everything else.
Very convenient for fast holds. The latch to loosen and tighten the magic arm that holds that phone is super convenient too.
I’m used to twisting the knob round and round but here it’s like a switch and works well.
It comes with action camera mount and phone mount. Great starter sets. I look forward to sticking my own mounts on this suction cup.
But for what it sticks to, it’s stuck well.
I was not very trusting it can support my phone on it but now I think it works great if you can get it to stick.
The squeeze function makes it pretty simple. Your job is only to press down hard enough to get all the suction cup touching the surface and then the pump does everything else.
Very convenient for fast holds. The latch to loosen and tighten the magic arm that holds that phone is super convenient too.
I’m used to twisting the knob round and round but here it’s like a switch and works well.
It comes with action camera mount and phone mount. Great starter sets. I look forward to sticking my own mounts on this suction cup.
22/08/2025
Although the electric suction cup mounts are quite effective at what they do, they are electric so they can inherently be more noisy when the pressure starts to loosen up. Meanwhile most of the normal suction cups tend to just let go without prior indication, this one gives you the peace of mind of not only when the suction is strong enough when setting up, but also when it starts to be loosen.
The first time using this I had trouble getting the suction to work properly. After pfaffing around for a little it finally started working and oh boy does it work well. It works so well that you can still get some decent results on painted gyprock. At the base the strength it can hold up is indeed impressive, though with more of an arm extended away from your mounting surface it will cause the suction to be less strong. In which case, staying with very light weight equipment is best--if you had to use heavier gear like a smaller mirrorless camera, either the mounting surface should be horizontal, or you should keep the magic arm very close to the mounting surface.
The magic arms themselves do work pretty well but it also can struggle with heavier loads, so in terms of how heavy it can hold will be in a similar recommendation as the suction mounting itself.
Unsticking the suction cup once it is properly placed, thanks to the visual indicator, is a little difficult still. Good thing the little protruding bit on the suction cup does a good job at helping you break the seal.
Overall though, this is a pretty impressive kit if you are looking for something of a manual suction cup accessory with a manual pump for added security. Thanks to the mounting holes you can also change what and how you mount things to it, as well as using multiples to attach larger gear. For how well it is made and how effective it is, this is a pretty well priced model that can very easily be recommended.
The first time using this I had trouble getting the suction to work properly. After pfaffing around for a little it finally started working and oh boy does it work well. It works so well that you can still get some decent results on painted gyprock. At the base the strength it can hold up is indeed impressive, though with more of an arm extended away from your mounting surface it will cause the suction to be less strong. In which case, staying with very light weight equipment is best--if you had to use heavier gear like a smaller mirrorless camera, either the mounting surface should be horizontal, or you should keep the magic arm very close to the mounting surface.
The magic arms themselves do work pretty well but it also can struggle with heavier loads, so in terms of how heavy it can hold will be in a similar recommendation as the suction mounting itself.
Unsticking the suction cup once it is properly placed, thanks to the visual indicator, is a little difficult still. Good thing the little protruding bit on the suction cup does a good job at helping you break the seal.
Overall though, this is a pretty impressive kit if you are looking for something of a manual suction cup accessory with a manual pump for added security. Thanks to the mounting holes you can also change what and how you mount things to it, as well as using multiples to attach larger gear. For how well it is made and how effective it is, this is a pretty well priced model that can very easily be recommended.
17/08/2025
Soy usuario habitual de productos K&F, siempre valoro el equilibrio que logran entre calidad y precio. He adjuntado un video y varias fotos donde muestro en detalle el producto, su mecanismo de succión y su robustez.
Diseño y Calidad de Construcción
Desde que la sacas de la caja, la sensación es de un producto premium. Mantiene la excelente calidad de construcción de su hermana mayor, con plásticos de alta densidad y componentes metálicos donde realmente importa. No se siente como un accesorio barato; inspira confianza para montar equipos que valen mucho más.
El Corazón del Sistema: La Succión por Vacío.
Lo que realmente distingue a esta ventosa de otras opciones más económicas es su sistema de bomba de vacío. En lugar de una simple palanca, se presiona un botón varias veces para extraer el aire, creando un vacío increíblemente fuerte. Una vez pegada al parabrisas o a una ventanilla, es realmente difícil de mover.
Un detalle ingenioso y que aporta muchísima tranquilidad es el indicador de seguridad en el propio botón. Una línea blanca te avisa si la succión ha perdido algo de fuerza, permitiéndote asegurarla con un par de bombeos más. Es una característica de diseño muy inteligente que te da la certeza de que tu equipo está seguro. Además, han incluido un pequeño orificio para pasar un cordón de seguridad, añadiendo una capa extra de protección. ¡Bien pensado, K&F!
Estabilidad y Versatilidad
El brazo con la rótula (ball mount) es igual de robusto. La palanca de apriete es grande y cómoda, y una vez que la giras, la rótula queda completamente fija, sin ningún tipo de juego ni holgura. Esto es crucial para evitar vibraciones en las grabaciones, especialmente en un coche en movimiento.
La versatilidad está garantizada gracias a las roscas estándar de 1/4"−20, tanto en la base como en el tornillo de la rótula. Además, se incluyen accesorios muy útiles: una pinza para móvil de buena calidad y el anclaje estándar para cámaras de acción.
Mi Experiencia de Uso
Principalmente la uso para montar una cámara de acción en el interior de mi vehículo, ya sea en el parabrisas o en las ventanillas laterales. El gran beneficio frente a otros sistemas que he probado es su flexibilidad. No es una montura permanente con adhesivos que dañan el salpicadero o son difíciles de quitar. Puedo ponerla y quitarla en segundos, cambiarla de posición o incluso usarla en otro coche. Esta libertad es, para mí, su mayor ventaja.
Conclusión
Si buscas un sistema de montaje de ventosa que sea compacto, increíblemente fuerte y que te dé total confianza, esta es una opción fantástica. Es la combinación perfecta de diseño inteligente, materiales de calidad y versatilidad. Ideal para cámaras de acción, móviles o incluso cámaras sin espejo de poco peso. Un producto totalmente recomendable.
Diseño y Calidad de Construcción
Desde que la sacas de la caja, la sensación es de un producto premium. Mantiene la excelente calidad de construcción de su hermana mayor, con plásticos de alta densidad y componentes metálicos donde realmente importa. No se siente como un accesorio barato; inspira confianza para montar equipos que valen mucho más.
El Corazón del Sistema: La Succión por Vacío.
Lo que realmente distingue a esta ventosa de otras opciones más económicas es su sistema de bomba de vacío. En lugar de una simple palanca, se presiona un botón varias veces para extraer el aire, creando un vacío increíblemente fuerte. Una vez pegada al parabrisas o a una ventanilla, es realmente difícil de mover.
Un detalle ingenioso y que aporta muchísima tranquilidad es el indicador de seguridad en el propio botón. Una línea blanca te avisa si la succión ha perdido algo de fuerza, permitiéndote asegurarla con un par de bombeos más. Es una característica de diseño muy inteligente que te da la certeza de que tu equipo está seguro. Además, han incluido un pequeño orificio para pasar un cordón de seguridad, añadiendo una capa extra de protección. ¡Bien pensado, K&F!
Estabilidad y Versatilidad
El brazo con la rótula (ball mount) es igual de robusto. La palanca de apriete es grande y cómoda, y una vez que la giras, la rótula queda completamente fija, sin ningún tipo de juego ni holgura. Esto es crucial para evitar vibraciones en las grabaciones, especialmente en un coche en movimiento.
La versatilidad está garantizada gracias a las roscas estándar de 1/4"−20, tanto en la base como en el tornillo de la rótula. Además, se incluyen accesorios muy útiles: una pinza para móvil de buena calidad y el anclaje estándar para cámaras de acción.
Mi Experiencia de Uso
Principalmente la uso para montar una cámara de acción en el interior de mi vehículo, ya sea en el parabrisas o en las ventanillas laterales. El gran beneficio frente a otros sistemas que he probado es su flexibilidad. No es una montura permanente con adhesivos que dañan el salpicadero o son difíciles de quitar. Puedo ponerla y quitarla en segundos, cambiarla de posición o incluso usarla en otro coche. Esta libertad es, para mí, su mayor ventaja.
Conclusión
Si buscas un sistema de montaje de ventosa que sea compacto, increíblemente fuerte y que te dé total confianza, esta es una opción fantástica. Es la combinación perfecta de diseño inteligente, materiales de calidad y versatilidad. Ideal para cámaras de acción, móviles o incluso cámaras sin espejo de poco peso. Un producto totalmente recomendable.
16/08/2025
This mount- this mount is a powerhouse. I love the pump to attach the suction and the pumping mechanism has a marking to show if the the mount has lost suction at a glance.
Quality aluminum frame is lightweight and strong. Very happy with this one
Quality aluminum frame is lightweight and strong. Very happy with this one
16/08/2025