Review for: "K&F Concept 3" Suction Cup Camera Mount with Magic Arm for Car, 1/4" ARRI Holes, Dual Ball head Magic Arm with Phone Holder and Action Cam Adapter Compatible with DJI Go Pro Hero 13 Insta360 X5 iPhone"
Brand: K&F Concept

First look:
The K&F Concept Camera Mount came in a box (15.2 cm 7.1 cm x 16.3 cm) with the User manual, Website paper, Suction cup, Magic arm, Phone holder, Action cam adapter, and Allen wrench.

Information & Precautions:
The phone mount can be mounted horizontally or vertically and the ball socket joints on the magic arm can go straight up or horizontally or anywhere in between.

The suction cup needs to go onto a surface that is dry, clean, flat, smooth, and non-porous. It will not work on painted surfaces, marble, old tile, wallpaper, unpainted wood surfaces, rough glass, or other rough surfaces.

The absorption status should be checked every 2 hours by checking that the warning line is not visible, and it is recommended to pressurize the air pump every 4 hours.

When used on the outside of a vehicle, it should only be used with a safety rope, and the vehicle should stay below 80 km/hr. There is a safety rope hanging hole but the safety rope is not included. Don't use the suction cup with a selfie stick or extension pole. The applicable temperature is -20°C to 60°C.

Operation:
Put the suction cup firmly onto the surface, then press the suction valve repeatedly until the safety warning line disappears. Make sure the suction cup is fully attached to the object. If the safety warning line is exposed during use, press the suction valve until the safety warning line disappears again.

To remove, first remove the equipment attached to it. Then press the release buttons on both sides of the suction cup at the same time to release the suction.

When storing the suction cup, cover the protective cap to prevent damage to the bottom of the suction cup.

Testing & Opinion:
I ordered the suction cup camera mount for my kayak. The front of my kayak isn't exactly flat so it does lift off more easily than if it was a flat surface. However, it does free up my hands when paddling and makes my videos much better than having the camera attached to my life jacket.

This is a neat mount for attaching cameras or phones to flat objects, and the suction cup works well and can be pumped to re-engage.